| Location: | London, ON |
| Date Posted: | Apr 17, 2026 |
Job Description
Job Title: CNC Operator III / Machinist
Location: 2068 Piper Lane / 290 Sovereign Road
Reports to: Production Manager
Compensation: $29.00-$40.00 per hour, based on experience and qualifications.
Posting Date: March 24, 2026
Position Overview:
The CNC Operator III reports to the Production Manager and is responsible for the operation, set-up and
troubleshooting of one or more machines. CNC Operators in this level may also be required to alter
and/or generate programs on various machines. The CNC Operator III will also work on a variety of
products.
Responsibilities and Accountabilities:
• Set-up, troubleshoot and/or operate new and existing production parts using vises, fixtures, chucks,
etc. with one or more of the following machine(s): CNC Lathe, CNC Mill, Bandsaw, Sandblaster,
Manual Mill, Manual Drill Press, hand grinders, and other power tools. These tasks will be done
under limited supervision.
• Alter/generate existing programs on four axis CNC machines by hand.
• Performs new set-ups on a variety of CNC equipment using an advanced level of tooling.
• Ensures that all set-ups are properly proven on CNC equipment for Level I and II Operators to run.
• Makes changes to existing programs to reflect engineering changes, casting variations, and
efficiencies.
• Capable to transfer CNC programs between CNC equipment.
• Capable of building complex tooling and fixturing as necessary to support machining requirements.
• May perform detailed machine adjustments, if necessary.
• May read and interpret technical drawings to verify machines parts, and to determine machine set-up
and production methods.
• May visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc)
as part of in-process inspection.
• Records results of defects and notifies lead/supervisor of deviation as appropriate.
• May use one or more of the following for measuring and inspection: tape measure, various types of
micrometers and calipers, profilometer, height gauge, indicators, edge finders, thread gauges, pin
gauges, and bore gauges with master ring.
• Understands and meets or exceeds production and quality standards; seeks to minimize reject rate.
• Follows approved drawings and a work instruction provided, and improves process and work
instructions for new and existing parts.
• Required to perform machine preventative maintenance functions, i.e. checking coolants, checking
lubricants, and changing filters, etc.
Keeps machines and work area clean; notifies supervisor or maintenance when machine
abnormalities occur.
• Safely move components with lifting devices such as overhead cranes, jib cranes, and fork-lifts.
• Possess the ability to use the computer system (MFG/Pro) for basic departmental transactions.
• Train other employees as required.
• Can be the recognized expert and may be sought out to perform leadership duties as necessary.
• Must serve as a resource to others in the resolution of complex technical problems.
Administration
• Maintains an acceptable level of performance by following established policies and procedures, and
participating in continuous improvement efforts by supporting and implementing new ideas.
• Sets a positive example by maintaining a respective attitude, cooperating with co-workers,
management, and internal and external customers.
• Be a productive team member and help to meet established departmental and Company goals.
• Wears appropriate personal protective equipment at all times when required
• Report any personal workplace injuries to direct supervisor immediately.
• Report safety issues to direct supervisor or EHS Manager as soon as possible.
• Responsible for knowing where non-hazardous waste collection containers are located and for putting
non-hazardous/hazardous wastes in appropriate containers.
• Report to work for your regularly scheduled shifts on time and ready to work.
• Follow all company policies and health and safety procedures.
• Effectively gives and receives feedback and willingly asks questions and seeks direction when
needed.
• May work any and all shifts/days as required and may be asked to work between ADJ facilities.
• Willingly accepts responsibility of sharing skills and knowledge with other employees.
• Perform all other duties as may be assigned from time to time.
Qualifications:
• Must meet the requirements of the Canadian Controlled Goods Security Assessment Application as
per Section 15 of the Controlled Goods Regulations, SOR/2001-32.
• Educational background in manufacturing or equivalent experience working on CNC machines
• 5+ years of experience working with CNC machines performing set-ups and program alterations
• Must be proficient with all CNC control systems within area of responsibility.
• Must be proficient in Geometric Dimensioning and Tolerancing (GD&T).
• Must have full understanding of G and M codes in order to perform set-up functions
• Skilled knowledge of blue print reading.
• Skilled machining experience, material knowledge, and math skills.
• Must meet all training requirements as defined by department.
*This position is an existing vacancy*
Successful applicants must meet all requirements under the Canada Controlled Goods
Regulations (CGR) and must be approved as mandated by Public Works & Government
Services Canada and applicable contractual obligations.
Use of Artificial Intelligence:
This recruitment process does not utilize artificial intelligence or automated decision-making
systems to screen, assess or select candidates.
Accommodations are available at all stages of the recruitment process. Applicants requiring
accommodation should advise us in advance. While we appreciate all applications, only
candidates selected for an interview will be contacted.
To apply, please email your resume and cover letter to [email protected]
For more information, please visit our website at www.adjindustries.com